1.Download the Zip file and extract it on Filer which you want to upgrade firmware (example: netapp01)
2.priv set advanced
3.storage download shelf (by typing this command and hitting enter it will prompt for "Are you sure you want to upgrade all the disk shelves" - If you wish to upgrade all the shelves go ahead and type "Y" or else if you need any particular shelf type following command
4.storage download shelf 0b.shelf4 (0b.shelf4 = adapter and shelf number)
while upgrading the shelf will be going to unknown state for few seconds, don't worry at that time it will come to "ok" state within few seconds.
to verify the upgraded firmware type this command " sysconfig -v"
All this you can run through CLI, You can also find this procedure in now.netapp.com
No comments:
Post a Comment